AMETEK Switch Logo
Search


Home

Banner Graphics
Application Graphics market graphics Technical Graphics

more ...


more ...


JAY46 100 - 150 AMP Magnetic Latching Contactor

Up to 60 VDC, 100 - 150 Amps

 

The MAGNA-LATCH TM Latched Low Voltage Disconnect Contactor is more compact than traditional low voltage disconnects. The permanent magnet holds the contact closed. Momentary power to the coil closes the contact, while a momentary reverse power signal to the coil opens the contact. The MAGNA-LATCH TM also uses the same bus bars available on traditional electrically held contactors.

 

Optional features of the MAGNA-LATCH TM include special coil voltage silver-plated bus bars, custom bus bars, mounting studs and nuts in bus bars, and additional auxiliary contacts. Screw coil terminals, side mounted feet for horizontal mounting and a rectifier for AC coil operation are additional optional features.

 

Benefits:

  • Coil heat is eliminated
  • Reduces need for redundant power control
  • 24 VDC units suitable for use on 48 VDC systems
  • Designed to remain closed for 20 years
  • Fail safe - contacts open or close only when appropriate signal is applied

 

more ...


JBY46 150 - 200 AMP Magnetic Latching Contactor

Up to 60 VDC, 150 - 200 Amps

The MAGNA-LATCH TM Latched Low Voltage Disconnect Contactor is more compact than traditional low voltage disconnects. The permanent magnet holds the contact closed. Momentary power to the coil closes the contact, while a momentary reverse power signal to the coil opens the contact. The MAGNA-LATCH TM also uses the same bus bars available on traditional electrically held contactors.

Optional features of the MAGNA-LATCH TM include special coil voltage silver-plated bus bars, custom bus bars, mounting studs and nuts in bus bars, and additional auxiliary contacts. Screw coil terminals, side mounted feet for horizontal mounting and a rectifier for AC coil operation are additional optiona features.

Benefits:
  • Coil heat is eliminated
  • Reduces need for redundant power control
  • 24 VDC units suitable for use on 48 VDC systems
  • Designed to remain closed for 20 years
  • Fail safe - contacts open or close only when appropriate signal is applied
more ...


JCY46 250 - 400 AMP Magnetic Latching Contactor

Up to 60 VDC, 250 - 400 Amps

The MAGNA-LATCH TM Latched Low Voltage Disconnect Contactor is more compact than traditional low voltage disconnects. The permanent magnet holds the contact closed. Momentary power to the coil closes the contact, while a momentary reverse power signal to the coil opens the contact. The MAGNA-LATCH TM also uses the same bus bars available on traditional electrically held contactors.

Optional features of the MAGNA-LATCH TM include special coil voltage silver-plated bus bars, custom bus bars, mounting studs and nuts in bus bars, and additional auxiliary contacts. Screw coil terminals, side mounted feet for horizontal mounting and a rectifier for AC coil operation are additional optional features.

Benefits:
  • Coil heat is eliminated
  • Reduces need for redundant power control
  • 24 VDC units suitable for use on 48 VDC systems
  • Designed to remain closed for 20 years
  • Fail safe - contacts open or close only when appropriate signal is applied
more ...


Model HB 551 400 - 600 AMP DC Contactor

Coil Voltage 12 V to 240 VDC, UL Approved

The HB Series DC contactors are specifically designed for use in standby power applications and in the telecommunications industry. Typical applications include emergency lighting systems, welding equipment, commercial and military generator sets, load bank power circuits, and battery chargers. Each contactor is available for mounting in various positions.

more ...


Model HB 60 300 - 400 AMP DC Contactor

Coil Voltage 12 V to 240 VDC, UL Approved

The HB Series DC contactors are specifically designed for use in standby power applications and in the telecommunications industry. Typical applications include emergency lighting systems, welding equipment, commercial and military generator sets, load bank power circuits, and battery chargers. Each contactor is available for mounting in various positions.

more ...


Model HB 7 100 - 200 AMP DC Contactor

Coil Voltage 12 V to 240 VDC, UL Approved

The HB Series DC contactors are specifically designed for use in standby power applications and in the telecommunications industry. Typical applications include emergency lighting systems, welding equipment, commercial and military generator sets, load bank power circuits, and battery chargers. Each contactor is available for mounting in various positions.

more ...


Model HB1 100 - 200 AMP DC Contactor

Coil Voltage 12 V to 240 VDC, UL Approved

The HB Series DC contactors are specifically designed for use in standby power applications and in the telecommunications industry. Typical applications include emergency lighting systems, welding equipment, commercial and military generator sets, load bank power circuits, and battery chargers. Each contactor is available for mounting in various positions.

 

more ...


Model JA 46 100 - 150 AMP DC Contactor

100 - 150 Amp Rating, Coil Voltage 12 V to 240 VDC

AMETEK Switch 46 Series DC Contactors are designed to fit a wide range of applications including electric forklift trucks, DC winches, electric vehicles, and more recently to the telecommunications industry. The 46 Series is of a modular design construction, featuring a quick assembly and disassembly with the removal of two screws. This format offers the user an easier and cost effective way to servicing. The availability of different mounting styles offers greater flexibility and with space a premium, makes this design a requirement. This 100 - 150 amp contactor is available in coil voltages from 12 V through to 240 VDC, in both continuous and intermittent duty. It is also tested to withstand a mechanical life of 3 million cycles. The AMETEK Switch 46 Series is a high-performance quality, low cost, versatile contactor with totally interchangeable contacts. With all of the above attributes, the 46 Series is a truly dependable DC contactor.

 

There are options available for the JA 460 Series:

  • Magnetic Blow-Outs - Normally used when switching voltages higher than 48 VDC
  • Auxiliary Switches - Available on all JA Series except the JAD and JAV styles. Rated 5 amps at 24 VDC
  • Large Contacts - Used mainly in severe applications such as pump motor switching. The suffix “L” denotes the large contacts.
more ...


Model JB 46 150 - 200 AMP DC Contactor

150 - 200 Amp Rating, Coil Voltage 12 V to 240 VDC

JB 46 Series Contactor is rated at 150 - 200 amps. This versatile unit is available in coil voltages from 12 V through to 240 VDC. It can be mounted in pairs on a bracket together with interconnecting electrical links. When used in electric vehicle systems, the JBM and JBV styles are designed for motor reversing.

There are options available for the JB 46 Series:
  • Magnetic Blow-Outs - Normally used when switching voltages higher than 48 VDC
  • Auxiliary Switches - Available on all JB Series except the JBM styles. Rated 5 amps at 24 VDC
  • Large Contacts - Used mainly in severe applications such as pump motor switching. The suffix “L” denotes the large contacts.
more ...


Model JC 46 250 - 350 AMP DC Contactor

250 - 350 Amp Rating, Coil Voltage 12 V to 240 VDC

JC 46 Series contactor is rated at 250 - 350 amps. This versatile unit is available in coil voltages from 12 V through to 240 VDC. It can be mounted in pairs or a triple assembly on a bracket, together with interconnecting electrical links to suit customer needs. The JCM type has a built-in failsafe. If both coils are energized simultaneously, the contact design creates an open circuit.

There are options available for the JC 46 Series:  
  • Magnetic Blow-Outs - Normally used on all inductive load applications and on resistive loads when switching voltages higher than 48 VDC
  • Auxiliary Switches - Available on the JC Series and rated 5 amps at 24 VDC
  • Large Contacts - Used mainly in severe applications such as pump motor switching. The suffix “L” denotes the large contacts.
more ...


Model JCA48 250 - 300 AMP DC Contactor

Up to 60 VDC, 250 - 300 Amps

The JCA48 Series DC contactors are specifically designed for use in Resistive Load applications, particularly the standby power market and in the telecommunications industry.

Other typical applications include emergency lighting systems, welding equipment, commercial and military generator sets, load bank power circuits, and battery chargers, for Inductive Load applications please contact AMETEK Switch for additional data on this product. Each contactor is available for mounting in various positions.

Coil Voltage 12 V to 240 VDC, UL Approved

more ...


Model JCY48 250 - 300 AMP Magnetic Latching Contactor

Up to 60 VDC, 250 - 300 Amps

The MAGNA-LATCH TM Latched Low Voltage Disconnect Contactor is more compact than traditional low voltage disconnects. The permanent magnet holds the contact closed. Momentary power to the coil closes the contact, while a momentary reverse power signal to the coil opens the contact. The MAGNA-LATCH TM also uses the same bus bars available on traditional electrically held contactors.

Optional features of the MAGNA-LATCH TM include special coil voltage silver-plated bus bars, custom bus bars, mounting studs and nuts in bus bars, and additional auxiliary contacts. Screw coil terminals, side mounted feet for horizontal mounting and a rectifier for AC coil operation are additional optional features.

Benefits:

  • Coil heat is eliminated
  • Reduces need for redundant power control
  • 24 VDC units suitable for use on 48 VDC systems
  • Designed to remain closed for 20 years
  • Fail safe - contacts open or close only when appropriate signal is applied
more ...


Model JDA 46 350 - 450 AMP DC Contactor

450 Amp Rating, Coil Voltage 12 V to 240 VDC

The JDA is a single pole, single throw, normally open heavy duty DC contactor and is particularly suited to standby power applications, especially telecommunications.

The JDA Series Contactor is fully serviceable with spare kits available for bridges and contacts, and is also interchangeable with other leading brands. The coils used are generally continuous types, however intermittent and prolonged use coils are available. The coil voltage ranges from 12 V up to 240 VDC. Closed contactor housings are available to prevent the ingress of dust and dirt.

Care should be taken to ensure that switches are not located in positions where any heavy arcs originating from the contactor can cause damage to adjacent parts.

Features:

  • Robust and durable
  • Compact
  • Easy servicing
  • Interchangeable with other leading brands
Options:
  • Auxiliary contacts
  • Closed contactor housings
  • Mounting brackets
  • Coil suppression
  • Coil rectifier
  • UL Approval
more ...


Model JEA 46 450 - 600 AMP DC Contactor

450 - 600 Amp Rating, Coil Voltage 12 V to 240 VDC

The JEA is a single pole, single throw, normally open heavy duty DC contactor and is particularly suited to standby power applications, especially telecommunications.

The JEA Series Contactor is fully serviceable with spare kits available for bridges and contacts, and is also interchangeable with other leading brands. The coils used are generally continuous types, however intermittent and prolonged use coils are available. The coil voltage ranges from 12 V up to 240 VDC. Closed contactor housings are available to prevent the ingress of dust and dirt.

Care should be taken to ensure that switches are not located in positions where any heavy arcs originating from the contactor can cause damage to adjacent parts.

Features:
  • Robust and durable
  • Compact
  • Easy servicing
  • Interchangeable with other leading brands
Options:
  • Auxiliary contacts
  • Closed contactor housings
  • Mounting brackets
  • Coil suppression
  • Coil rectifier
  • UL Approval
more ...


Model JEA48 350 - 600 AMP DC Contactor

Up to 60 VDC, 350 - 600 Amps

 

The JEA48 Series DC contactors are specifically designed for use in Resistive Load applications, particularly the standby power market and in the telecommunications industry.

Other typical applications include emergency lighting systems, welding equipment, commercial and military generator sets, load bank power circuits, and battery chargers, for Inductive Load applications please contact AMETEK Switch for additional data on this product. Each contactor is available for mounting in various positions.

Coil Voltage 12 V to 240 VDC, UL Approved

more ...


Model JEY46 450 - 600 AMP Magnetic Latching Contactor

Up to 60 VDC, 450 - 600 Amps

The MAGNA-LATCH TM Latched Low Voltage Disconnect Contactor is more compact than traditional low voltage disconnects. The permanent magnet holds the contact closed. Momentary power to the coil closes the contact, while a momentary reverse power signal to the coil opens the contact. The MAGNA-LATCH TM also uses the same bus bars available on traditional electrically held contactors.

Optional features of the MAGNA-LATCH TM include special coil voltage silver-plated bus bars, custom bus bars, mounting studs and nuts in bus bars, and additional auxiliary contacts. Screw coil terminals, side mounted feet for horizontal mounting and a rectifier for AC coil operation are additional optional features.

Benefits:

  • Coil heat is eliminated
  • Reduces need for redundant power control
  • 24 VDC units suitable for use on 48 VDC systems
  • Designed to remain closed for 20 years
  • Fail safe - contacts open or close only when appropriate signal is applied
more ...


Model JEY48 350 - 600 AMP Magnetic Latching Contactor

Up to 60 VDC, 450 - 600 Amps

The MAGNA-LATCH TM Latched Low Voltage Disconnect Contactor is more compact than traditional low voltage disconnects. The permanent magnet holds the contact closed. Momentary power to the coil closes the contact, while a momentary reverse power signal to the coil opens the contact. The MAGNA-LATCH TM also uses the same bus bars available on traditional electrically held contactors.

Optional features of the MAGNA-LATCH TM include special coil voltage silver-plated bus bars, custom bus bars, mounting studs and nuts in bus bars, and additional auxiliary contacts. Screw coil terminals, side mounted feet for horizontal mounting and a rectifier for AC coil operation are additional optional features.

Benefits:

  • Coil heat is eliminated
  • Reduces need for redundant power control
  • 24 VDC units suitable for use on 48 VDC systems
  • Designed to remain closed for 20 years
  • Fail safe - contacts open or close only when appropriate signal is applied
more ...


about us - productsservice & supportcareers - contact us
applications - markets - technical
©Copyright 2010 AMETEK, Inc. All Rights Reserved
privacy policy - trademarks - sitemap